Shop By Brand

Additional Information

Site Information

 Loading... Please wait...
  • Image 1

KDE Direct Align Trex 700 / 800 Performance Tail Control V2 AT700-PTC-V2

$57.95
SKU:
KDE-AT700-PTC-V2
Weight:
0.20 LBS
Shipping:
Calculated at checkout
Quantity:

Product Description

Update: the "V2" design now includes the internal Bearing Holder Collar, so disassembly of the stock ALIGN Bearing
Holder is not required for easier installation.

Note: the KDE Direct TREX 700/800 Series Performance Tail Control V2 assembly is the ultimate, slop-free control system
available on the market to provide precise tail control and authority.  Add the
KDE Direct TREX 550/600/700/800 Series
Performance Tail Upgrade V2 to the system and you now have a complete, dual-radial ball bearing supported assembly
throughout for the ultimate flight characteristics.  With the mechanics of the dual-fork supported tail slider, there is no worry
of abnormal wear or torque loads on the tail shaft slider for a continuously smooth, failure-free operation even under the
hardest and most extreme flying conditions.

Important: due to the precision CNC-machining of each component,
correct installation is key for proper, bind-free operation.  Please pay
attention to the Installation Instructions and installation video, take your
time during the install, and make sure to apply medium-strength Loctite
(Blue 243 or equivalent) to all screws during assembly.  Once
fully-installed, a significant reduction in slop throughout the tail
mechanics will be clearly evident on the bench and in actual flight.

Includes:
- One (1) TREX 700/800 Series Aluminum Performance Tail Control Assembly V2
- One (1) TREX 700/800 Series Aluminum Performance Tail Control Mounting Bolt V2
- One (1) TREX 700/800 Series Aluminum Performance Tail Control Secondary Link V2
- One (1) TREX 700/800 Series Aluminum Performance Tail Control Primary Link V2
- One (1) TREX 700/800 Series Aluminum Performance Tail Control Arm Lever V2
- One (1) TREX 700/800 Series Aluminum Performance Tail Control Bearing Holder V2
- One (1) TREX 700/800 Series Aluminum Performance Tail Control Bearing Collar V2
- Two (2) Radial Ball Bearings 8 x 12 x 3.5 mm
- Six (6) Flanged Radial Ball Bearings 3 x 7 x 3 mm
- Seven (7) M3 x 0.5 x 6 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- One (1) TREX 550/600/700/800 Series Aluminum Performance Tail Upgrade V2 (When Included)
- Two (2) TREX 550/600/700/800 Series Aluminum Tail Control Link V2
- Two (2) SAE 660 Bronze Bushings 2 x 3 x 3 mm
- Two (2) Radial Ball Bearings 3 x 10 x 4 mm
- Four (4) Flanged Radial Ball Bearings 2 x 5 x 2.5 mm
- Two (2) M3 x 0.4 x 12 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Two (2) M2 x 0.4 x 8 mm Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Two (2) M3 Flat Washers (Zinc-Plated Alloy Steel)

Finish:
Clear anodize, mirror-polish CNC gloss

Weight:  
11 g (design is FEA optimized for maximum strength and minimum wieght)
t)

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category